@gzw613 完全是第一次注册do，也是第一次申请教育包…就说我注册时间太久了，不行，我纠缠了客服才给的50刀

自己不会弄用别人做好的一键脚本就可以了…
https://github.com/fanyueciyuan/eazy-for-ss/tree/master/ocservauto
然后自行修改配置文件，自己指定证书位置，路由表我用这个
https://github.com/CNMan/ocserv-cn-no-route

我早就发现了，之前我家广州电信50M下行，4m上行，现在也是1.5M上行……坑爹

都是砸场的，

.tk的免费域名哪里显示Invalid nameserver given lv3ns1.ffdns.net

@bugmenott 好吧，还是不行，我换系统试下吧，谢谢楼主

@bugmenott DO LONDON KVM构架
root@LON:~# ifconfig
eth0 Link encap:Ethernet HWaddr 04:01:44:1c:62:01
inet addr:46.101.59.96 Bcast:46.101.63.255 Mask:255.255.192.0
inet6 addr: 2a03:b0c0:1:d0::330:8001/64 Scope:Global
inet6 addr: fe80::601:44ff:fe1c:6201/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:35739 errors:0 dropped:0 overruns:0 frame:0
TX packets:42149 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:7437371 (7.4 MB) TX bytes:7540211 (7.5 MB)

eth1 Link encap:Ethernet HWaddr 04:01:44:1c:62:02
inet addr:10.131.176.26 Bcast:10.131.255.255 Mask:255.255.0.0
inet6 addr: fe80::601:44ff:fe1c:6202/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:7 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:578 (578.0 B)

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:11054 errors:0 dropped:0 overruns:0 frame:0
TX packets:11054 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:848727 (848.7 KB) TX bytes:848727 (848.7 KB)

tap_soft Link encap:Ethernet HWaddr 00:ac:a6:3c:25:45
inet6 addr: fe80::2ac:a6ff:fe3c:2545/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:11616 errors:0 dropped:0 overruns:0 frame:0
TX packets:28924 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:500
RX bytes:1000522 (1.0 MB) TX bytes:2394888 (2.3 MB)

@bugmenott
interface=tap_soft
dhcp-range=tap_soft,192.168.7.50,192.168.7.60,24h
dhcp-option=tap_soft,3,192.168.7.1
最后面的